Steps to fix Epson printer LCD E-01 Error Code 1-800-213-8289

Steps To Fix Epson Printer Error Code E-01, Read here to solve it using the following steps and know how it occurred.  This Epson Printer LCD Error Code E-01 LCD is determined in the Epson Service Manual section as a “fatal error”. Our professional Epson printer Technical Support experts have defined it in the form when “the printer is not able to finish the self test” job. When users are turning the printer’s power ON, it will begin to check the whole system. If for other reason, it can’t finish the self-test – the printer will further give an error message. It clearly means that users need to fix the problem first. If the self-test process is finished, then the printer is ready to print.

Easy Solution To Fix Epson Printer Error Code E-01

Steps to fix Epson printer LCD E-01 Error Code

1. Turn printer OFF. Unplug the power cable from wall outlet for 5 minutes. Power ON the printer again. If the error has not gone – follow next tips.
2. Make sure the transportation lock has been removed.
Store the transportation lock as shown below.

3. If the CD tray is in the eject position, make sure you press the CD Tray button to retract the tray to the storage position. Never push or pull the CD tray into position.
4. Turn the Epson printer OFF and make sure paper is not jammed inside the unit.
5. If you have printer with CISS installed make sure the printer carriage can go left and right easy.
6. Make sure the upper scanner part of printer is closed tightly. Nothing prevents to close it tightly.
7. That initialization routine that gets run on Start Up checks the entire units function before completeing without an error.
(You might have heard the noises, they are the carriages being sent to their home positions and making different sensors activate.)
8. If You use CISS – there maybe ink tubes preventing to move carriage from left to right. So we suggest You to install original Espon ink cartridges and run the printer. If there will be NO error – the reason is the CISS – installed not correctly.
9. Access the cartridge loading area while off and move the carriage away from the stops, just an inch is needed. Lifting slightly, it should move easily, if it appears sluggish at first, the ink collection cup is gummed up and needs cleaning.
10. The paper path has sensors that are mounted opposite the size adjustment slide on the paper tray. Usually a small opto-sensor, it can be blocked with dust. The solution is to disassemble the printer and clean all optical sensors, paper feed sensors, encoder strip and disc encoder.

One stop solution for your Epson printer Error at one call

Our Epson printer support technicians are always ready to sort out each and every printer related issue with latest solutions offered to its clients. We are a team of fastest printer tech support solution provider for every issues related to all printers such as Software installation issues, Driver Upgrade, Change Printer ink, Printer Spooler and Paper Jam issues etc. If users are unable to solve this problem, they are welcome to
Toll-Free 1-800-213-8289 and we promise to get back to them in short time span via our professional printer contact details. So, come and join us for tom experience our exceptional level printer solutions to your unexpected and critical issues.  And also our Canon printer technical support technicians are always ready to sort out each and every printer technical issues with instant solution.

How to Fix Epson Artisan 1430 FATAL ERROR message? 18002138289

The Epson Service Manual as FATAL error signifies that your printer is not in a position to finish the self-test process. While turning the printer’s power on, the device will begin to check its systems configuration architecture. Perhaps, if for any reason, the printer device is unable to finish the self test mode then the printer will absolutely print an error message. Well, it further means that a user needs to fix the problem as soon as possible. When the self-test mode is finished, the printer is now in a position to print the documents as instructed by users

Steps to Fix Epson Artisan 1430 FATAL ERROR message by Epson inkjet printer support ?

Well, there is no actual reset process for this “Fatal Error Service Condition” state because it’s usually encountered by either a failing hardware part issue, or maybe even related to servicing as well as cleaning issues of those related fractions.

 Printer Fatal Error can be caused by a lot of problems:

  • bad lubricate of the carriage guide shaft
  • dirty Encoder Strip or Paper Feed Encoder Wheel
  • dirty paper feed sensors
  • broken ribbon electrical cable going to carriage
  • cleaning fluid or inks flowed down the cables into the plug where the ribbon cables enter the print head causing an electrical short and bizzare error messages
  • burned electrical fuse on printer main board
  • hardware/part related failure
  • and many other reasons can give Fatal Error message

Make sure the transportation lock has been removed.

If the CD tray is in the eject position, make sure you press the CD Tray button to retract the tray to the storage position. Never push or pull the CD tray into position.

Turn the Artisan OFF and make sure paper is not jammed inside the unit.If you have printer with CISS installed make sure the printer carriage can go left and right easy.

Make sure the upper scanner part of printer is closed tightly. Nothing prevents to close it tightly.

Epson printer configration

The common things You have to do first is to check the Fatal Error number and its description that will point You where should You search the reason. Good site for Fatal Errors codes. Usually You have to remove the covers from the printer, remove the print head, clean the connector thoroughly, clean all sensors, reassemble the printer.

Our Epson printer support technicians are always ready to sort out each and every printer related issue with latest solutions offered to its clients. We are a team of fastest printer tech support solution provider for every issues related to all printers such as Software installation issues, Driver Upgrade, Change Printer ink, Printer Spooler and Paper Jam issues etc. If users are unable to solve this problem, they are welcome to drop us an e-mail or call on Toll-Free 1-800-213-8289 and we promise to get back to them in short time span via our professional printer contact details. So, come and join us for tom experience our exceptional level printer solutions to your unexpected and critical issues.